"Weighing Technology for Today's Industry"

 

Intercomp SW Series Wheel Load Scale

Intercomp SW Series
  • Fine tune vehicle weight and balance/center of gravity calculation
  • Jumbo size - 4 row supertwist LCD display
  • Capacities: 6,000 lb/2800 kg or 8,800 lb/4000 kg per system
  • Fourteen display modes of weights and percentages
  • Storage registers/printer/RS232 output

High visibility liquid crystal display.
Simultaneously reads out 4 lines of 20 characters each. Shows: (1) individual weight of each on each wheel; (2) percentage of total weight on each wheel; (3) LR and RF total weight plus percentage; RR and LF total weight plus percentage; (5) all wheel weights plus percentages at the same time; (6) plus all other possible combinations.

Top repeatability- consistently repeats same wheel weight.

Jumbo built-in memory- holds up to 100 complete set-ups-including track name and car number!

Permits "fine tuning" of vehicle weights and balance to get optimal weight distribution.

Calibration- allows on-site user calibration.

Shows weights in pounds or kilograms.

Push button zero.

High accuracy in two models: 1/10 of 1% (2.5 times greater than other makes) or 1/4 of 1%.

Two weight capacities: (1) 6000 lb/2800 kg (1500 lb/700 kg per pad); (2) 8880 lb/4000 kg (2200 lb/1000 kg per pad)

Power: 120-volt AC external 12-volt AC/DC and internal, C-size nickel cadmium rechargeable or alkaline batteries.

Built-in self-diagnostics to check memory, display, keypad, weighing channels, power supply and weigh pads.

Automatic turn-off to extend battery life.

Low battery indicator- tells user when batteries need recharging.

Internal memory recalls data of last vehicle weighed when unit is turned on.

Convenient size pads: 15" x 15" each to accept a wide range of wheel sizes.

Push Button night light.

Rugged, protective water-proof carrying case for control box.

Each system consists of 4 weigh pads, cables, control box (with case), battery recharger and instruction manual.

RFI/EMI protection.

 

Options

  •  Built-in printer to give permanent hard-copy of time and date, wheel weights, percentages, track name and car number.
  • Serial RS232 output.
  • 220 volts/50 hz power.
  • Up and down ramps for easy positioning of vehicle on weigh pads.
  • Carrying case for weigh pads, ramps, cables and control box case.

Any Questions?  E-Mail Us Here